|DESCRIPTION||SOLID CARBIDE TURNING INSERTS|
CNMG120408-MF3 (CNMG 432-MF3) TP3000
|STELLS & STEEL ALLOYS||STAINLESS STEELS|
TP3000 is classified as an ISO P30 and M25 grade and satisfies all applications where the primary demand is for toughness and exceptional reliability in machining steels and stainless steels.
The properties designed into TP3000 along with suitable chipbreaker geometries provide excellent reliability at high cutting data. Superior core toughness and high wear resistance give peak performance even under unstable conditions and severe interrupted cuts.
Wide variations in machinability from one batch of materials to another are easily accommodated by using TP3000 giving the minimum of disruption to the manufacturing process.
Due to its superior edge strength TP3000 is produced with a sharper cutting edge than normally expected from this category of insert grade. A sharper edge reduces the likelihood of built up edge when machining materials such as soft ductile steels and stainless steels especially where cutting speed is limited.
The chipbreakers are designed to control the chips when turning long chipping materials. Chipbreaker designations describe the application area as follows:
F = Finishing Digit:
M = Medium
R = Roughing
1 = For low feed rates and easy conditions
9 = For high feed rates and rough conditions
Chipbreaker with positive cutting rake angle intended for moderately difficult stainless steel.The MF3 is alsointended for light roughing in relatively soft, "tacky" steel and difficult to machine stainless steel if the depth ofcut is limited. MF3 can also be used for finishing of cast iron.
Machining range: f = .006-.016 ipr, ap = .040-.200"
THESE INSERTS HAVE BEEN PURCHASED DIRECT FROM SECO UK.
THE ITEM IS NEW, UNUSED AND IN ITS ORIGINAL SEALED BOX.
|MPN||CNMG120408-MF3 (CNMG 432-MF3) TP3000|